SALT WATER FISHING


 

 SALT WATER FISHING 

Spinning, Casting and Fly Rod


Tribute To Carl Hansen, Great Fisherman, Great Person

Posted by Jeff Schaeffer,  Repeated By a Guy Who Knew Carl…Me…He loved Fishing As He loved Life


AL:  I met Carl at his home when I first started in Fly Fishing at one of his weekly sessions decades ago.  I knew the iconic Bill Jackson’s Outdoor store, it was like bass Pro Shops before Bass… the Jackson family, and was a friend and customer where Carl worked in the fishing department. He was a local respected guru in the art of Fly fishing.    

A finer human being didn’t exist and no man loved his game more than him and was willing to share that love with anyone who wanted to learn… Jeff Schaeffer wrote this tidbit that gives you an insight into Carl.

🐟 The Glass Minnow
Carl Hansen was a fly angler from St. Petersburg, FL. He is known nationally as the inventor of the glass minnow pattern. Carl fished the saltwater flats near Tampa Bay, and had a unique approach. 

Envision a Tampa Bay fly fishing club outing. O dark thirty, and about 50 guys with the latest incarnation of graphite rods, Abel reels galore, and flats boats warming up at the launch ramp. Everyone up the night before tying the latest trendy fly patterns. Madness and mayhem as everyone headed out to be the first one on “ Big snook flat" or wherever they thought they needed to go given the tide, temperature, barometer, season, and latest guide reports.

Carl would sit there at the picnic area, wait for the sun to come up so he could tie up a few bend back glass minnows. Aluminum foil, mono overwrap for the bodies, a bit of bucktail, and red thread for the heads. No cement, a cheap vise that probably came from Herters in 1955, and I think he did own one pair of sewing scissors. He would then string up a 7 foot cane rod (a three weight, no less) with a reel that I believe was made in 1917- the year may not be right but it was given to him as a kid and he was about 80 years old when I knew him. 

He would then wade out in front of the picnic tables up to his knees, and no deeper. He would then cast back to shore. Although he could cast like no one else, most of his casts might be 30 feet. Each cast would last a couple minutes and he would move the fly continuously in little twitches or with a hand twist retrieve. In 2 or 3 hours he might move 30 feet. 

About noon, all the young guns would come flying back to the launch ramp for the picnic, and you know how this ends. Carl would have caught more fish than the rest of the club combined. His explanation was simple: his fly was in the water, and the glass minnow moves exactly like a real baitfish. Predators move, so most of the snook, seatrout, and redfish in Tampa Bay would pass by him at some point in the morning, and would encounter a fly that looked and moved naturally that was actually in the water when they cruised by.

Carl was an amazing guy- he and his wife Esther had a Thursday (f I am remembering right) Night Casting clinic that met once a week at their house for over 30 years, and historians will correct me that its tenure may have been much longer. He did get some recognition of his skills, and was often asked to tie flies at Florida heritage festivals. He could put a fly in a teacup at 30 feet every time you asked him to do it. No BS, every time, and none of this false casting to get the distance right. And this was not hyperbole. 

The club had casting contests, one of which was a teacup at 30 feet. I saw it. He fished until the very end of his life, and when the end came he went out like the man he was. He told his family and friends that he did not want a funeral. He said that anyone who gave a damn about him should take a child fishing.


🐟 How To Make The Glass Minnow

  • Use a pliers to bend a hook bend back style. Most people bend it too far. Don’t.  
  • Wrap a bit of foil around the hook shank below the bend.Take a piece of 8 to 12 lb. mono, and wrap it over itself using a snell knot. 
  • It takes some practice, but you will end up with shiny foil body protected by mono wraps.
  • Tie in a sparse bucktail wing. I think that white over greenish blue was Carl’s favorite, but he also felt that any color would work. 
  • It has to be sparse. Carl would have corrected my wing as resembling a feather duster.  That is it.    
  • HINT AND TECHNIQUE:   Fish the fly over any seagrass bed, bottom discontinuity, or structure. Move it slowly so it crawls along through the water column just above the grass.  Expect the unexpected.





News you can use from NOAA Planet Stewards 

"Earth and sky, woods and fields, lakes and rivers, the mountain and the sea, 
are excellent schoolmasters, and teach some of us more than we can ever learn from books."

– John Lubbock


FTC Will Make Changes In South West Florida Catch-And-Release Area —

The Florida Fish and Wildlife Conservation Commission (FWC) will make changes to snook, redfish and spotted seatrout management in the area of southwest Florida where they are currently catch-and-release only. 

As a reminder, snook, redfish and spotted seatrout were temporarily made catch-and-release only in this area after these fisheries were impacted by a 2017-2019 severe red tide. 

Starting June 1, 2021, the following changes will take place:

  •  Pasco County and Tampa Bay: 
  •  Normal regulations will resume for snook, redfish and spotted seatrout in all state waters in Pasco County, Pinellas County and Tampa Bay. 
  •  These regulations are for all state waters north of State Road 64 in Manatee County plus the Braden River but not including Palma Sola Bay. 
  •  Sarasota Bay through Gordon Pass in Collier County:
  •  Snook and redfish will remain catch-and-release through May 31, 2022.
  •  Spotted seatrout harvest will resume with a six-fish recreational vessel limit. Commercial harvesters will also be held to the recreational three-fish bag and six-fish vessel limits. 
  •  These regulations are for all state waters south of State Road 64 in Manatee County including Palma Sola Bay through Gordon Pass in Collier County but not including the Braden River or any tributaries of the Manatee River.


NOAA Planet Stewards Program Links:


SALTWATER FLY FISHING, HOOKS

Saltwater fly fishing is typically done with heavier tackle than that which is used for freshwater or Bass/ Trout fishing, both to handle the larger, more powerful fish, and to accommodate the casting of larger and heavier flies.  Salt water fly fishing typically employs the use of wet flies resembling baitfish, crabs, shrimp and other forage. 

However, saltwater fish can also be caught with poppers and other surface lure similar to those used for freshwater bass fishing, though much larger in the flats and shallows, and low tides  Saltwater species sought and caught with fly tackle include: bonefish, redfish or red drum, permit, snook, spotted sea trout, tuna, dorado, aka mahi-mahi, sailfish, tarpon, striped bass, salmon, giant trevally and marlin. 

Offshore saltwater species are usually attracted to the fly by “ chumming” with small baitfish, or "teasing" the fish to the boat by trolling a large hookless lure (Billfish are most often caught using this method).

Many saltwater species, particularly large, fast and powerful fish, are not easily slowed down by “ palming” the hand on the reel.  With braided line slowing the fish by squeezing the line can result in a nasty ragged bloody cut…

Instead, a purpose-made saltwater reel for these species must have a powerful drag system and Salt water will ruin anything, so rinse your reels after use and keep well lubed. 

Furthermore, saltwater reels purpose-made for larger fish must be larger, heavier, and corrosion-resistant; a typical high-quality HD saltwater reel can range up to $500.00 or more. 


IMPORTANT:   Corrosion-resistant equipment is key to durability in all types of saltwater fishing, regardless of the size and power of the target species. Rinsing gear in fresh water is essential after usage.  Reels with removable spools have advantages, but expensive in some cases.

Saltwater fly fishing is most often done from a boat, either a shallow draft flat boat is used to pursue species such as bonefish, redfish, permit and tarpon in shallow waters, or from larger offshore boats for pursuing sailfish, tuna, dorado, marlin and other pelagic’s and most popular methodology may be done from shore, such as wading flats for bonefish or redfish or surf fishing for striped bass and other assorted fish. 

Typically, most trout fly fisherman need to practice new skills to catch saltwater fish on a fly rod. Ocean fish are usually harder to catch. They can be extremely spooky, and much larger. Trout fisherman need to practice with at least an 8 weight fly rod and accurately cast the line 30–90 feet if they are going to have success—particularly in the flat areas fishing for bonefish, redfish, permit, tarpon, jacks and more.  They can be spooky but when they hit, it’s an explosion.

Hooks for saltwater flies must also be extremely durable and corrosion resistant. Most saltwater hooks are made of stainless steel but the strongest (though less corrosion resistant) hooks are of high-carbon steel. Typically, these hooks vary from size #8 to #2 for bonefish and smaller nearshore species, to size #3/0 to #5/0 for the larger offshore species.

https://content.govdelivery.com/accounts/FLFFWCC/bulletins/27d890d #Florida #fishing 


Two Schools Of Thought Involve Hooks    

Resourceful anglers have incorporated circle hooks into almost every saltwater presentation over the past 25 years.  From their modern origins in the longline tuna and Pacific Northwest halibut fisheries to their explosion across all fisheries in the past decade, circle hooks have flooded the market like a new-moon tide on a Savannah salt marsh.

Today, adept professionals like Capt. Mike Weinhofer, of Compass Rose Charters in Key West, Florida, utilize circle hooks on a daily basis, whether they’re bridling baits for sailfish, bottom-fishing in the Gulf of Mexico, shark fishing on the flats or live-baiting for yellowtail snapper.  “I almost always use in-line circle hooks,” says Weinhofer. “Lots of sailfish tournaments require the use of in-line hooks, and the hookup ratio compared to offset hooks is not much different.”

The key to successful circle-hook fishing with natural bait is picking the proper hook, and our circle hook size chart below should help. Circles range in size, gauge and style, with enough variance to intimidate even the most experienced angler. Consider these important aspects of the best circle hooks before rigging your next bait.

Circle Hook Size  —  A true circle hook is engineered so the point is at a 90-degree angle or less to the shank of the hook — that single attribute causes predictable hook-sets in the corner of the jaw. But getting the right-size hook might play an even larger role in whether your bait swims naturally or the hook sets true.

Unfortunately, anglers cannot trust that hooks labeled with the same number from different manufacturers are equally sized. Just because Eagle Claw’s Lazer Sharp circles (L2004EL), sizes 4/0 to 7/0, are perfect for anglers fishing with live mullet inshore, or Trokar Lancet circle hooks (TK4), ranging from 5/0 to 7/0, are prime for chunking baits to mahi, that doesn’t mean that Mustad, Gamakatsu or VMC follow the same sizing chart. To put it bluntly, there is no standard for hook sizes — it’s truly up to the manufacturer.


Trokar TK5  —  “The difference in sizing between manufacturers can be drawn all the way back to some of the original hook makers,” says Matt Gray, category manager of Eagle Claw Fishing Tackle. “Some manufacturers base the size on gap size, while others base it on the overall length of the hook.”

When live-baiting, match the size of your hook to your baitfish, he says. A hardy baitfish, such as a blue runner or jack, can handle a thicker-gauge hook without killing the bait. With any kind of fishing, make sure your target species is able to ingest the hook and bait, says Gray. In general, anglers should try to use the smallest hook they can get away with.

Weinhofer takes it one step further, matching the size and gauge of his hook to how much drag he intends to put on the fish.  “If I’m deep-dropping or fishing for tuna, I’ll use a heavy-gauge hook to handle the heavy drag pressure,” says Weinhofer. “But for sailfish tournaments, I’ll use a 6/0 thin-wire VMC tournament hook with a large gap that maxes out at about 28 pounds.”

VMC Tournament Circle  When shark fishing, Weinhofer intentionally uses a light-wire hook to help with the release. "I ask my anglers to take it easy on the drag when fishing sharks," he says. "When the shark gets to boat-side, I can apply pressure with my hand on the leader, and the hook actually bends free without me getting close to their teeth."


In-Line or Offset Circle Hooks  —  The in-line versus offset argument has been around for years, and it’s still debatable whether offset hooks catch more fish than in-line (non-offset) hooks.  Based on my fishing experiences, offset circle hooks defeat the purpose of a conservation-crafted hook because of their tendency to lodge deep in the throat of a fish.

“Use in-line hooks for situations where conservation is an issue,” says Syd Rives, of Gamakatsu hooks. “In-line circle hooks don’t gut-hook fish as often as offset circles, so they are a good choice for tournament fishermen and other recreational fishing, where the angler is not keeping his or her catch.”

Nonoffset circles are definitely picking up steam in terms of popularity. “The Big Eye Circle is perfect for larger fish, bottomfishing, deep-dropping and trolling,” says Rives. “Gamakatsu’s HD Live Bait Circle is a good chunk-bait hook for larger fish like tuna and bottom species.”

VMC recently introduced its 7266 Inline Single hook to replace trebles on lures and plugs. The high-carbon-steel hook features an extra-wide gap to improve catch rates, along with an ­oversize eye for freedom of movement.

Some circle hooks have offset eyes for a snelled connection that doesn't gut-hook species, such as Gamakatsu's Octopus Inline Circle and VMC's Sport Circle. "If I'm drifting baits for tarpon in Key West harbor, I always snell to an offset-eye circle hook," says Weinhofer. "A snelled hook seems to drift back truer with the chum and leads to a solid hook-set."

Gamakatsu   —  “The thinner your hook, the better your penetration and the faster the hook will set itself,” says Cyrille Mathieu, VMC Hooks’ vice president of sales and marketing. But not all species are caught on light-wire hooks; different species and tactics require distinctive styles of circles.

“We offer a wide variety of circle hooks,” says Mathieu, “from fine-wire to 6x-strong wire gauges, smaller and larger hook gaps, offset and nonoffset hook shanks, and even regular and large hook eyes.”

The different characteristics of a hook hint at how the bait is rigged and what species it can handle. Giant marlin often require a 6x-strong, heavy-duty 16/0 circle hook such as the VMC 9788, says Mathieu. To catch tournament ­sailfish, use a lighter 6/0 to 8/0, wide-gap, non-offset tournament circle, such as model 7385.

Mustad —  Demon Circle Ex-Fine —  There are no hard-set rules, so it’s better to use your judgment and some basic guidelines when you’re not sure which is the best circle hook to buy. Sometimes picking a hook is as easy as reading the description on the package. The basic live-bait principles below help clear up some confusion:

  • Short-shank circle hooks interfere less with the bait presentation, while longer-shank hooks are used with larger baits. Light-wire hooks are ideal for stealthy and realistic ­presentations, such as when you’re casting delicate live shrimp.

  • The heavier the gauge of the hook, the more drag pressure the hook can handle. However, a thicker-gauge hook shank requires a larger bait that can stay alive and will present properly. Heavy-gauge or larger-size hooks often come with larger hook-eye openings to handle thicker leader, wire or cable material. A short-shank, heavy-gauge circle hook is about as strong as you can get, used to catch trophy-class fish such as bluefin tuna.

  • Wide-gap circle hooks offer the best hookup ratios, which explains why many billfish anglers use them when tournament sailfishing. But wide gaps are also more likely to bend or snap under a heavy load. The best bet is to find a happy medium that suits your style of fishing.

  • As circle hooks evolve, showing the inveterate advantages extolled by so many captains, anglers must be able to select the right size and style hook for their method of bait fishing.  Don’t let the fish run circles around you.

  • Circle hooks are designed for conservation and catch‑and-release fishing and So it makes sense that hook materials must be strong yet able to rust from a fish mouth. Most manufacturers now produce their hooks from premium high-carbon or Vanadium steel, says Matt Gray, of Eagle Claw. 

  • Sometimes a black-nickel finish is added to increase sharpness and encourage corrosion, depending on the manufacturer. In fact, some ­manufacturers, such as VMC Hooks, recommend that stainless steel and other highly noncorrosive ­surfaces be banned as finishes because they inhibit rusting.

  • Saltwater, by boat,  deep or pier fishing is a different set of rules.  Mostly seasonal and size limitations, you need the state chart or a lawyer to figure the rules and limits on time and size.  My conventional fishing gear like spinning and larger heavier casting reels, usually live bait and some lures work for that in the inner-coastal, bridges and offshore.

  • Florida is blessed with mangroves , flats and good weather year round that suits the fly-fisherman.  Winter can offer great fishing opportunities for some of the state’s most sought-after fish species. As the temperatures drop, you’ll spot many anglers, following spotted sea trout to fresher water, where the fish congregate in large schools closer to warmer water.   

  • Be aware of the area you will be fishing and local fish you might catch. Know the regulations for your target species and make sure you have all the proper gear. Determining ahead of time which fish you are going to keep versus which fish you will release is an easy step to take. Knowing which fish he plans to release helps to get those fish back in the water quickly, increasing survival and benefitting the fish population. 

  •  Knotless, rubber-coated net – These support the weight of the fish while removing a minimal amount of slime, which protects the fish from infection.

  • Barbless circle hooks – Are 90% more likely to hook a fish in the mouth. Hooking a fish in the mouth reduces internal harm and decreases de-hooking time, getting the fish back in the water faster and increasing its chance of survival.

  •  De-hooking tool – Allows anglers to quickly release their catch while minimizing fish and self injuries and handling time. Just take the hemostat and crush the barb, then if you hoof your face it will be easy to remove.

  •  Correct weight tackle – Using tackle heavy enough to land a fish quickly is important so fish are less exhausted and more able to avoid predators upon release.

  • If you are new to fishing, this might be the first time you have heard about barbless hooks and you may not know exactly what they are. Barbless hooks are simply hooks that do not have the small v-shaped metal piece at the pointed end of the hook that points in the opposite direction of the sharp pointed tip. Some hooks can be purchased without the barb, but you can also crimp down the barb on any standard barbed hook using a pair of flat-nosed pliers to make it barbless.


Why Use Barbless Fishing Hooks  —  Since it's important to help conserve our fish populations for future generations, more and more anglers are making the decision to use barbless fishing hooks instead of barbed hooks. Hooks without barbs are far better to use for catch and release fishing because they greatly reduce the chance of causing injury the fish. This may not matter if the fish is within the state regulations and you plan to take it home for dinner, but it can make a difference in the survival rates of any fish that you release.

  • Hooks without a barb tend to cause less injury to the fish because they can be removed more easily. In other words, since you don't have to push the sharp v-shaped metal piece or barb through the mouth of the fish, there is less of a chance that you will further injure the fish before releasing it.
  • You can return the fish to the water quicker since barbless hooks allow you to remove the hook faster. In most situations, you won't need to use pliers or a de-hooking device.
  • Barbless fishing hooks are safer for anglers to use. As you might imagine, a hook without a barb will be much easier to remove from your skin or the skin of another angler in case of an accident.
  • Hooks with barbs create resistance that can make it harder for the point to penetrate. Hooks without a barb don't create that resistance, so hooking the fish can be easier with barbless fish hooks.
  • Fishing regulations may occasionally require the use of barbless hooks while fishing for certain species or on specific waterways when additional conservation measures are needed to protect the fish population.


Barbless Treble Hooks  —  Treble hooks without barbs can be used to replace the treble hooks with barbs that often come attached to most lures. It doesn't matter if you want to use a topwater hard bait, crankbait, or spoon, most barbed treble hooks can easily be replaced using a pair of split ring pliers. Whether you fish with a barbless treble hook or a barbless single hook, both are good choices when you plan to practice catch and release fishing 

  • Dremel tools make a circular diamond wheel that reshapes treble hooks beautifully and polishes.

  • Make sure to reel the fish in as quickly as possible especially a big one, by managing the drag tension. Horsing a trout into the boat can usually result in additional tearing of the area they are hooked, especially around the mouth.   Work them in as they tire and keep tension on the line to prevent a hook release. 

  • Anglers should always use a net for landing medium-to-large trout and dip/wet any measuring board with water before laying the fish on the board.    Avoid removing large fish from water. If you must remove them, support their weight horizontally to prevent damage to their internal organs.  And take pictures of your catch while it is in the water. This puts less stress on the fish and the fish will look bigger.

  •  If a net is needed to land or control a fish, always use a knotless, rubber-coated landing net.   Return the fish to the water as quickly as possible. One of the major factors in the survival of a released fish is how much time it spends out of the water.   Be sure to wet your hands before handling a fish to prevent damaging its protective slime coating. Don’t use gloves or towels, as this will remove the protective slime.   Never hold a fish by the gill cover or eyes and hold fish horizontally to support their internal organs.  If possible, keep the fish in the water while removing the hook. 

  • Gripping devices can be effective for controlling and handling fish, especially ones with sharp teeth. Grip behind the lower lip and support the weight of the fish in a horizontal position.  If the fish has swallowed the hook, cut the line as close to the hook as possible. Attempting to remove the hook can do more harm than good. Use non-stainless-steel hooks since they eventually dissolve or pass naturally.

  •  Place the fish in the water and allow it to swim away on its own; do not toss the fish back.  If fish is in shock, Revive fish that do not swim away immediately or appear lethargic.    Place fish in the water head first – it is easiest to hold one hand on the bottom lip or tail and one hand under the belly of the fish.    Move the fish forward in the water – this allows the water to be flow through the mouth and over the gills. The fish must face the direction of water flow.  
    Use a figure-8 motion to move the fish forward constantly, ensuring water continues to flow over the gills. Never jerk fish back and forth, since this action prevents water from properly flowing through the gills.

  •  For fish caught in deep water with signs of barotrauma, use a descending device to return fish to depth or vent the fish by inserting a sharpened, hollow tube at a 45-degree angle, one inch behind the base of the pectoral fin.

  • The steps you take on the water today can help positively impact the future of your Florida fish populations! Dropping temperatures don’t have to mean a drop in the survival of the fish you release. To learn more about proper catch-and-release techniques, visit     MyFWC.com/FishHandling

📸📽📺

06/04/2021   aljacobsladder.com